ElCidRo
May 2, 09:05 AM
so much for the no malware on macs myth :D
funny how the apple fanboys are getting all defensive :rolleyes:
funny how the apple fanboys are getting all defensive :rolleyes:
I'mAMac
Aug 29, 04:50 PM
THAT is something we agree completely on. :D ;) I bike back and forth to the university every day. I save money both on gas and gym at the same time as I do something for the environment.
Good we need more people to do that :) And i do agree with you about burning fossil fuels. Contributes the most.
Good we need more people to do that :) And i do agree with you about burning fossil fuels. Contributes the most.
twoodcc
Oct 26, 12:29 AM
well i must say i'd be kinda suprized to see an update this early with apple. especially since i just bought a mac pro. i'd be mad if the prices of the one i just bought goes down
TripHop
Apr 12, 11:48 PM
Might be great down the road, but something tells me my FCP7 will be plenty useful for at least the next couple years.So if you upgrade to the new Final Cut Studio which includes the new Final Cut Pro 7 for $299 will Final Cut Pro X be a free upgrade or what? :confused:
Never mind. Apple still has a NEW corner on the FCP page and my Zite just posted a 21 month old Apple press release as if it was news. :rolleyes:
Never mind. Apple still has a NEW corner on the FCP page and my Zite just posted a 21 month old Apple press release as if it was news. :rolleyes:
sinsin07
Apr 9, 06:44 AM
I would consider myself a hardcore gamer and I'm not ashamed of it. I went to PAX East the last 2 years and own all 3 home consoles plus a PSP, 3DS, DSi, iPhone and iPad. Gaming kept me away from all the drugs and alcohol that my friends were doing in high school. I'm almost 30 now and I'm married, have a good job, have a beautiful home and a beautiful wife, so lets not get stereotyped.
call of duty black ops guns.
call of duty black ops guns
games: Black Ops launches
CALL OF DUTY BLACK OPS GUNS
call of duty black ops guns
Call of Duty : Black Ops
call of duty black ops guns.
in Call of Duty Black Ops
call of duty black ops guns
call of duty black ops guns.
call of duty black ops guns.
Call of Duty: Black Ops
call of duty black ops guns
Call of Duty :Black Ops
LondonCentral
Apr 9, 12:18 AM
That's a complete joke, surely? There's no way you can compare console gaming, in basically a home arcade, to swiping your fingers around on a 3.5" screen. No way. I am a gamer, and always will be.
Gaming on the iPhone is good for 2-minute bursts, such as when sitting on the toilet. It's not a great games device. Most of the games are cheap with no replay value.
Of course it's a complete joke. Xbox 360 and PS3 sales STILL increase annually. Kinect is the fastest selling gaming tech ever. The ONLY way Apple could ever move in on console territory is if they made Apple TV into a games console too and added real buttoned controllers, real games with depth and a real credible online service that isn't 'Games Center' or iTunes related.
After three years my xbox 360 succumbed to the ring of death. Microsoft replaced it with a brand new system, free of charge. I was very happy.
Don't even attempt to compare real consoles to iOS devices. It's way too soon. It's an interesting direction for Apple, although they'd have to give us technology that will last for 5 or 6 years rather than 'just enough on the spec sheet' to last a mere 12 months.
Gaming on the iPhone is good for 2-minute bursts, such as when sitting on the toilet. It's not a great games device. Most of the games are cheap with no replay value.
Of course it's a complete joke. Xbox 360 and PS3 sales STILL increase annually. Kinect is the fastest selling gaming tech ever. The ONLY way Apple could ever move in on console territory is if they made Apple TV into a games console too and added real buttoned controllers, real games with depth and a real credible online service that isn't 'Games Center' or iTunes related.
After three years my xbox 360 succumbed to the ring of death. Microsoft replaced it with a brand new system, free of charge. I was very happy.
Don't even attempt to compare real consoles to iOS devices. It's way too soon. It's an interesting direction for Apple, although they'd have to give us technology that will last for 5 or 6 years rather than 'just enough on the spec sheet' to last a mere 12 months.
AppliedVisual
Oct 30, 11:11 PM
No AV you misunderstand. Mac Pro comes with 4 HD Sleds built in. What he's asking is if we could get more so we can have a bunch of HDs already mounted in additional sleds so we can pop 'em in real fast whenever we need to change them out for didfferent client projects.Good to know.
Oh... That makes much more sense now. :cool:
Now what about instead of dealing with the solution of swapping drives in/out of the Mac Pro, instead use an external fiber channel or eSATA drive enclosure with hot-swappable drives? Fiber channel would be expensive unless you're already using it, but eSATA enclosures aren't all that bad.
Oh... That makes much more sense now. :cool:
Now what about instead of dealing with the solution of swapping drives in/out of the Mac Pro, instead use an external fiber channel or eSATA drive enclosure with hot-swappable drives? Fiber channel would be expensive unless you're already using it, but eSATA enclosures aren't all that bad.
desdomg
Mar 18, 06:24 PM
There are two reason why this doesn't mean much. First, Apple may just cancel the accounts of anyone who tries to use PyMusique (that's covered by the EULA).
But can a user be considered to be a party to that agreement if they have not used iTunes to access the store - does the purchasing process still involve an agreement approval stage using this software? Presumably not.
But can a user be considered to be a party to that agreement if they have not used iTunes to access the store - does the purchasing process still involve an agreement approval stage using this software? Presumably not.
Mikael
Jul 12, 04:42 PM
Even if the internal architecture of the two chips is the same, a Dual 3.0ghz Woodcrest configuration is still going to outperform a Single 2.66ghz Conroe. While Conroe might be very good, it's not the best, which is what pro customer's expect from Apple's highest-end workstation offering.
I thought it was pretty obvious that I was talking about a potential single CPU Mac Pro. Woodcrest would obviously have to be used in a dual CPU machine. Also, I'd expect that lower speed grades would be offered too, which would make a 2.66GHz Conroe a nice pick. Or is only the absolutely highest clocked version of the CPU good enough to satisfy the demanding professional Mac users? :rolleyes:
Sorry, just tired of the so called professionals that can't stop whining about how anything other than the best is an insult... It's annoying and it gets old fast.
I thought it was pretty obvious that I was talking about a potential single CPU Mac Pro. Woodcrest would obviously have to be used in a dual CPU machine. Also, I'd expect that lower speed grades would be offered too, which would make a 2.66GHz Conroe a nice pick. Or is only the absolutely highest clocked version of the CPU good enough to satisfy the demanding professional Mac users? :rolleyes:
Sorry, just tired of the so called professionals that can't stop whining about how anything other than the best is an insult... It's annoying and it gets old fast.
Multimedia
Oct 2, 06:07 PM
Since the 2.33GHz Clovertown processors are priced the same as the 3GHz Woodcrests - $851, I think it's fair to say the current 3GHz Quad Core Mac Pro costs about $825 per core while the 8-core 2.33GHz Dual Clovertown Mac Pros will cost only about $412.50 per core. That looks like real progress to me. On the GHz front, the current one running @ 12GHz is about $275 per GHz of power while the 8-core running @ 18.64GHz is about $177 per GHz of power. That looks like real progress as well. :)
Huntn
Mar 13, 07:40 AM
Washington Post 12Mar2011 (http://www.washingtonpost.com/wp-dyn/content/article/2011/03/12/AR2011031205493.html?hpid=topnews):
Chief Cabinet Secretary Yukio Edano said radiation at the reactor exceeded legal limits and that it was "highly possible" a partial meltdown was underway.
Chief Cabinet Secretary Yukio Edano said radiation at the reactor exceeded legal limits and that it was "highly possible" a partial meltdown was underway.
carfac
Sep 12, 06:02 PM
I do not see the point... What does this do that anyone could possiblky need???
300 bones for a glorified wi-fi widget is way off base. It is going to have a LOT more added to be worth that. Of course, we are talking about Apple, so overcharge is the rule, not the exception.
For my money, it's gonna have to be a REAL media center, and there is no way THAT ios gonna happen for 3 bills. Tivo today announced a HD-PVR for 8- that price range is acceptible, but it's gonna have to be HD, PVR, tunner, alkl that stuff. This box, worthless to me.
300 bones for a glorified wi-fi widget is way off base. It is going to have a LOT more added to be worth that. Of course, we are talking about Apple, so overcharge is the rule, not the exception.
For my money, it's gonna have to be a REAL media center, and there is no way THAT ios gonna happen for 3 bills. Tivo today announced a HD-PVR for 8- that price range is acceptible, but it's gonna have to be HD, PVR, tunner, alkl that stuff. This box, worthless to me.
DrGruv1
Sep 26, 02:37 PM
Quad-core Clovertown server CPUs to appear on November 16
Intel will announce two-way quad-core server Clovertown processors, which will be marketed under the Xeon 5300-series name, on November 16, according to Taiwan-based motherboard makers. The quad-core Clovertown processors contain two dual-core Woodcrest chips housed in a single package.
The Xeon 5300 CPU family will debut with the Xeon X5355 (2.66GHz/1333MHz FSB/8MB L2 cache), E5345 (2.33GHz/1333MHz FSB/8MB L2 cache), E5320 (1.86GHz/1066MHz FSB/8MB L2 cache) and E5310 (1.60GHz/1066MHz FSB/8MB L2 cache), with unit prices ranging from US$455 to US$1,172, indicated the sources.
In addition, Intel is scheduled to launch one-way quad-core Kentsfield processors under the Xeon 3200 lineup in January the makers said. By the third quarter of next year, Intel will launch its four-way quad-core Tigerton CPUs, the makers added.
Rival AMD will announce its first dual-core server processors manufactured using 65-nanometer (65nm) process technology by the first quarter of according to the makers.
http://www.digitimes.com/mobos/a20060925A5022.html
Intel will announce two-way quad-core server Clovertown processors, which will be marketed under the Xeon 5300-series name, on November 16, according to Taiwan-based motherboard makers. The quad-core Clovertown processors contain two dual-core Woodcrest chips housed in a single package.
The Xeon 5300 CPU family will debut with the Xeon X5355 (2.66GHz/1333MHz FSB/8MB L2 cache), E5345 (2.33GHz/1333MHz FSB/8MB L2 cache), E5320 (1.86GHz/1066MHz FSB/8MB L2 cache) and E5310 (1.60GHz/1066MHz FSB/8MB L2 cache), with unit prices ranging from US$455 to US$1,172, indicated the sources.
In addition, Intel is scheduled to launch one-way quad-core Kentsfield processors under the Xeon 3200 lineup in January the makers said. By the third quarter of next year, Intel will launch its four-way quad-core Tigerton CPUs, the makers added.
Rival AMD will announce its first dual-core server processors manufactured using 65-nanometer (65nm) process technology by the first quarter of according to the makers.
http://www.digitimes.com/mobos/a20060925A5022.html
Rt&Dzine
Apr 22, 10:40 PM
Would it make a difference if a huge portion of what you've been exposed to, regarding religion/Christianity, was fundamentally incorrect? For example, there's no such place as hellfire; nobody is going to burn forever. Everybody isn't going to heaven; people will live right here on the earth. If you learned that a huge portion of those really crazy doctrines were simply wrong, would it cause you to view Christianity/religion differently?
If there is a god(s), it probably won't be anything like what these manmade religions have concocted. There could be multiple gods, or gods that don't give a crap about you, or who knows what. Also, the existence of a creator doesn't mean that there is an afterlife for any human.
If there is a god(s), it probably won't be anything like what these manmade religions have concocted. There could be multiple gods, or gods that don't give a crap about you, or who knows what. Also, the existence of a creator doesn't mean that there is an afterlife for any human.
darkplanets
Mar 12, 02:14 PM
While I am not a nuclear engineer, I do have a fair amount of knowledge in the area, so with that in mind I can personally say that this will NOT become another Chernobyl situation. Again though as a disclaimer, this is not my career.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
superslashers
Jun 22, 12:03 PM
What is it with AT&T and dropped calls? They are starting to make people REALLY MAD I think AT&T has to step there game or people are going to go to T-Mobile lol they will just have to unlock there iPhones!
BJNY
Nov 1, 04:08 AM
Clovertons to run hot until 2007 according to:
http://www.reghardware.co.uk/2006/11/01/intel_fwives_core/
http://www.reghardware.co.uk/2006/11/01/intel_fwives_core/
Number 41
Apr 15, 09:56 AM
there is a very fine limit to it. Problem is a VERY VERY small percentage of people are going to take on 99% of the bulling.
Class of 30 students you will have 1 kid who is targeted. As that moves up to Jr high and high school the ratio gets even worse were you may find a 100 to 1 or higher ratio. That 1% has to take on 99% of the bulling and what makes it worse is that same 1% is not going to be helped or defended by others for fear of them being dragged into it and being the target as well. It is ugly. I was on the receiving side.
It is one thing for minor picking on things from friends but another for bulling.
And, for many in that 1%, it's never going to stop until they learn to deal with it -- you can stop bullying in schools, but once you get out in the real world it becomes a much more difficult thing. You can't shield people from hate / fear / dislike or being singled out for being different. You can try to educate, you can try to get people to stop, but at the end of the day there will always be bullies and there will always be people being picked on.
Developing coping skills is far more important than efforts to end bullying -- you can help yourself, you can't force someone else to be nice.
Class of 30 students you will have 1 kid who is targeted. As that moves up to Jr high and high school the ratio gets even worse were you may find a 100 to 1 or higher ratio. That 1% has to take on 99% of the bulling and what makes it worse is that same 1% is not going to be helped or defended by others for fear of them being dragged into it and being the target as well. It is ugly. I was on the receiving side.
It is one thing for minor picking on things from friends but another for bulling.
And, for many in that 1%, it's never going to stop until they learn to deal with it -- you can stop bullying in schools, but once you get out in the real world it becomes a much more difficult thing. You can't shield people from hate / fear / dislike or being singled out for being different. You can try to educate, you can try to get people to stop, but at the end of the day there will always be bullies and there will always be people being picked on.
Developing coping skills is far more important than efforts to end bullying -- you can help yourself, you can't force someone else to be nice.
iJohnHenry
Apr 23, 04:14 PM
Let's just say for a second there is no God. Then what a sad planet we live on if the future is up to us humans. my two cents
Even if there is, He might be off creating other beings on the other millions of habitable planets.
He could very well be not unlike a comet, and He'll be back in a million or so of our years, to see how we have fared.
I'm not waiting up, like for Santa. http://i55.photobucket.com/albums/g158/MouseMeat/Smilies/Offtobed.gif
Even if there is, He might be off creating other beings on the other millions of habitable planets.
He could very well be not unlike a comet, and He'll be back in a million or so of our years, to see how we have fared.
I'm not waiting up, like for Santa. http://i55.photobucket.com/albums/g158/MouseMeat/Smilies/Offtobed.gif
Gurutech
Oct 26, 06:44 PM
On the video front, crushing video down to mp4 files is a two stage process which each use 3-4 cores. Hosing an 8-core Mac Pro will be no problem. Those of you who think that 8-cores is a lot and crazy have no experience with multi-core applications and the idea of running multiple instances of even single core applications simultaneously. You are going to have to begin to RETHINK how you execute your workflow - i.e. the ORDER in which you initiate processes - to get the most bang out of an 8-core Mac Pro and to begin learning how to get more work done in far less time than you do today.
Thank you for both those posts. I have felt pretty alone on these 8-core threads thus far. Glad to finally see someone else who understands and can explain so well why 8-cores is still not going to be enough joining in on these discussions.
Any of you who don't think a 16-core Mac Pro will be a hit in a year can really only be into word processing. :p
Mac Pro is only true desktop offering from Apple. That's the problem.
Not that many individuals really want that much power.
However, they do intensive enough tasks requiring more power that exceeds what iMac can offer. The price and power ratio of iMac is just not enough.
Apple really needs something between "Pro" and "Consumer".
If iMac offered the ability to work as monitor, I wouldn't be disappointed by this much.
This is getting old already, but what I need is a decent Conroe Desktop with around 1500 USD price tag.
Thank you for both those posts. I have felt pretty alone on these 8-core threads thus far. Glad to finally see someone else who understands and can explain so well why 8-cores is still not going to be enough joining in on these discussions.
Any of you who don't think a 16-core Mac Pro will be a hit in a year can really only be into word processing. :p
Mac Pro is only true desktop offering from Apple. That's the problem.
Not that many individuals really want that much power.
However, they do intensive enough tasks requiring more power that exceeds what iMac can offer. The price and power ratio of iMac is just not enough.
Apple really needs something between "Pro" and "Consumer".
If iMac offered the ability to work as monitor, I wouldn't be disappointed by this much.
This is getting old already, but what I need is a decent Conroe Desktop with around 1500 USD price tag.
r1ch4rd
Apr 23, 05:09 PM
I know a few, they are surgeons and oncologists.
Just ask their patients. ;)
I'm glad my doctor isn't omniscient... she might not approve! :)
Just ask their patients. ;)
I'm glad my doctor isn't omniscient... she might not approve! :)
rdowns
Mar 24, 07:17 PM
The Catholic Church doesn't hate homosexuals
Hate the sin, love the sinner. ;)
Hate the sin, love the sinner. ;)
Pilgrim1099
Apr 9, 09:42 PM
I 'm waiting for Apple to BUY Nintendo.
Will never, ever happen. Do some research. Nintendo is based off from Japan, not the USA originally.
And guess who's come back from the dead?
http://blogs.wsj.com/digits/2011/04/08/commodore-64-welcome-back-old-friend/?mod=google_news_blog
What goes around, comes around. Apple can stay on for so long and sooner or later, they're bound to fall. They're human and they can't keep it up forever.
EDIT: I meant this http://www.commodoreusa.net/CUSA_TronVideo.aspx
Will never, ever happen. Do some research. Nintendo is based off from Japan, not the USA originally.
And guess who's come back from the dead?
http://blogs.wsj.com/digits/2011/04/08/commodore-64-welcome-back-old-friend/?mod=google_news_blog
What goes around, comes around. Apple can stay on for so long and sooner or later, they're bound to fall. They're human and they can't keep it up forever.
EDIT: I meant this http://www.commodoreusa.net/CUSA_TronVideo.aspx
AJsAWiz
Jun 13, 06:12 PM
I'm not letting AT&T off easily, but I still argue that half of the problem is the iPhone itself. When I'm the only person with an iPhone and everyone else around me is on old cell phones on the same network and they have 5 bars and I have no signal, there's a problem.
Are those other phones accessing the 3G network? I carried a non 3G network AT&T phone around with me and experienced none of the signal problems I had with my iPhone in the same areas.
Are those other phones accessing the 3G network? I carried a non 3G network AT&T phone around with me and experienced none of the signal problems I had with my iPhone in the same areas.
No comments:
Post a Comment